On the Client tab, retain the default values for all options.On the General tab, configure the public network interface address of the peer, select Obtain Automatically, and retain the default values for the other options.Open the ShrewSoft VPN client (VPN Access Manager) and click Add.Configure the ShrewSoft VPN client on the PC.ipsec policy policy 10 isakmp template policy_tempĪpply the IPSec policy to GigabitEthernet 1/0/1.

pre-shared-key FW-ike-peer-peer1] xauth enableĬonfigure an IPSec policy in template mode. authentication-algorithm sha2-256Ĭonfigure an IKE peer. esp encryption-algorithm aes-128Ĭonfigure an IKE proposal.

Configure the data flow to be protected by the IPSec tunnel.

radius-server shared-key cipher FW-radius-temp1] undo radius-server user-name domain-includedĬonfigure a service scheme for access users. radius-server authentication 10.1.1.5 1812 weight 80

Configure the pubic and private routes from the FW to the PC.

To use the protocol or port as the matching condition, you need to enable ESP and port 500 for UDP (port 4500 also in NAT traversal scenarios). In this example, the source and destination addresses are used as the matching condition. This policy can use the source and destination addresses, protocol, or port as the matching condition.

The Local-Untrust interzone policy controls whether IKE negotiation packets can pass through the FW.

# Configure security policies to allow the PC and headquarters to negotiate an IPSec tunnel. # Configure a security policy to allow PC users to actively initiate access to the headquarters users. # Configure a security policy to allow headquarters users to actively initiate access to the PC users.

Configure inter-zone security policies.

add interface GigabitEthernet 1/0/2Īdd GigabitEthernet 1/0/1 to the Untrust zone.

Add interfaces to the corresponding security zones.Īdd GigabitEthernet 1/0/2 to the Trust zone.

Shrew soft vpn negotiation timeout